Black Box ACX288 DKM FX HD Video and Peripheral Matrix Switch, 288-Port.
|Connectors||I/O card slots: (366), unpopulated;
Power supply slots: (3) with (2) prepopulated with power supply card, each containing (1) IEC 320 C14 power input;
Control card (prepopulated): (2) USB Type A F, (1) DVI-D F, (1) RJ-45 (1000BASE-TX), (1) DB9 F (RS-232);
Ground: (2) grounding screws
|Indicators||LEDs: Switch chassis: (3) fan tray LEDs for operation and hotswap;
Power supply: (3) LEDs for AC Input, DC Output, Temperature
|Distance (Maximum)||Depends on cards/SFPs installed and if cards/SFPs are communicating with a ServSwitch DKM Extender Transmitter or Receiver;
Without extenders, amplifiers, or boosters and with appropriate card/SFP installed:
Over solid CAT5e/CAT6: 460 ft. (140.2 m);
Over single-mode 9-µm fiber: 10 km (6.2 mi.);
Over multimode 50-µm (OM3) fiber: 1 km (0.6 mi.);
Over multimode 50-µm fiber: 400 m (1312.3 ft.);
Over multimode 62.5-µm fiber: 200 m (656.1 ft.)
NOTE: If you use multimode fiber cable with the system's single-mode transmitters and receivers, you normally can double the maximum acceptable cable length.
|Power||From (2) pre-populated power supply cards (third slot available for optional third power supply card): Input: 100-240 VAC, 50-60 Hz; Output: 30 amps;
Consumption: 202 watts max., chassis alone, without I/O card(s); each I/O card adds 13 watts max.
|Size||22.75"H (13U) x 19"W x 12"D (57.8 x 48.3 x 30.5 cm)|
|Weight||Fully equipped: 76.2 lb. (34.6 kg)|